| Model Name | FlowGuard VC |
|---|---|
| Bag Size Supported | #1 (Ø7" x 17") and #2 (Ø7" x 32") |
| Material of Construction | SS304 |
| Closure Type | V-Clamp Quick-Release |
| Design Pressure | Max. 7 bar (100 psi) |
| Design Temperature | Up to 100°C (depending on gasket material) |
| Inlet/Outlet Connection | 2” NPT Threaded (Standard) |
| Seal/Gasket Options | Buna-N (standard), EPDM, Viton (optional) |
| Surface Finish | Sandblast |
| Vent/Drain Ports | ¼” NPT (Optional) |
| Installation Orientation | Vertical |
| Recommended Flow Rates | #1: Up to 20 m³/hr #2: Up to 40 m³/hr |
| Brand | KETCO |
|---|---|
| Model Code | NMO |
| Type | Nylon Monofilament Mesh Filter Bag |
| Material | Nylon Monofilament Mesh |
| Micron / Rating | 37 – 1, 000 micron |
| Max. Operating Pressure | 2.5 bar |
| Max. Operating Temperature | 150°C |
| Connections / Size | Sizes 1–4 (standard bag housings) |
| Key Applications | Water treatment — pre-RO, sediment removal; Food & beverages — edible oils, syrups, juices, flavorings (FDA-compliant versions available); Chemical processing — acids, solvents, gel-like contaminants, paints, inks, coatings; Automotive & metalworking — coolants, lubricants, cutting fluid debris; Electronics & semiconductor manufacturing — ultrapure water pre-filter, precision equipment protection; Textile & paper industry — dyes, sizing agents, printing inks |
| Filter Media | Polypropylene |
|---|---|
| Support Layers | Polypropylene |
| End Caps / Core / Cage | Polypropylene / Glass fiber reinforced Polypropylene |
| Micron Ratings | 0.2, 0.5, 0.65, 1, 3, 5, 10, 20, 30,50,70, 100 µm |
| Outer Diameter | 68mm |
| Inner Diameter | 33mm |
| Sealing | Silicone, EPDM, FKM, NBR, PFA Encapsulated FKM/ PFA Encapsulated silicone |
| Steam Sterilization | 121C for 30min |
| Lengths Available | 10", 20", 30", 40" |
| Filtration Surface Area | Up to 0.7 m² per 10" cartridge |
| Filter Media | Polypropene Polyester |
|---|---|
| Recomended Change Out | Pleated metal media |
| Maximum Differential Pressure | Typically 1 – 100 micron |
| Maximum Operating Temperature | 10", 20", 30", 40" |
| Retention Rating | Absolute: 1, 5, 10um (>99.9%) |
| Sizes | 01 : 178(diameter) x 350mm |
| Filter Area | 01 : 1.1 m2 |
| Maximum Flow Rate | Absolute: 01 : 25m 3/h , 02 : 50m 3/h |
| Filter Media | Polypropylene |
|---|---|
| Inner Support Core | Polypropylene / SUS 316L |
| Outer Cage | Polypropylene |
| End Caps | Polypropylene |
| Micron Ratings | 0.1,0.2, 0.45, 0.65, 1, 3,4.5,5,8, 10, 20, 30µm |
| Outer Diameter | 68mm |
| Inner Diameter | 33mm |
| Sealing | Silicone, EPDM, FKM, NBR, PFA Encapsulated FKM/ PFA Encapsulated silicone |
| Max. Temperature: | 80C |
| Max. Diff. Pressure | 5.2bar @ 25C; 2.7bar @ 80C |
| Steam Sterilization | 121C for 30min, 90C hot water daily sterilization during CIP phases |
| Lengths Available | 10", 20", 30", 40" |
| Filtration Surface Area | Up to 0.52 m² per 10" cartridge |
| Filtration Efficiency | > 99.98% |
| Filter Media | 100% Meltblown Polypropylene |
|---|---|
| Filtration Efficiency | ≥90% Nominal Efficiency |
| Outer Diameter | 63 mm (2.5") |
| Lengths Available | 10", 20", 30", 40" |
| End Cap Configuration | DOE, SOE (222/226 with Flat or Fin) |
| Gasket/O-Ring | EPDM, Buna-N, Silicone, Viton |
| Max. Operating Temp. | 80°C (176°F) |
| Recommended Change-Out Diff. Pressure | 1.5–2.5 bar (21–36 psi) |
| Max. Diff. Pressure | 3.4 bar (50 psi) @ 25°C |
| Chemical Compatibility | Excellent with Acids, Alkalis, and Solvents |
| Material | 304SS, 316SS, 316L SS |
|---|---|
| Finishing | Mirror polish, Sand blast |
| Inlet/Outlet | 2", 3", 4" up to 16" Flange |
| Vent | 1/4" NPT (F) |
| Drain | 1/2" NPT (F) |
| Max. Pressure | 150psi |
| Material | 304SS, 316SS, 316L SS |
|---|---|
| Inlet/Outlet | 3/4", 1" |
| Cartridge Length | 40", 60" |
| Max. Pressure | 150psi (10bar) |
Search
Archive
Recent Posts
Categories
- Filter Bags & Elements (4)
- Filter Cartridges & Elements (23)
- Filter Housings (12)
- Strainers (2)
Recent Comments