| Material | 304SS, 316SS, 316L SS |
|---|---|
| Finishing | Mirror polish, Sand blast |
| Inlet/Outlet | 2", 3", 4" up to 12" Flange |
| Vent | 1/4" NPT (F) |
| Drain | 1/2" NPT (F) |
| Max. Pressure | 150psi |
| Material | 304SS, 316SS, 316L SS |
|---|---|
| Finishing | Mirror polish, Sand blast |
| Inlet/Outlet | 1", 2" NPT (F), |
| Vent | 1/4" NPT (F) |
| Drain | 1/2" NPT (F) |
| Max. Pressure | 150psi |
| Brand | KETCO |
|---|---|
| Model Code | PG-SC-PP |
| Type | Single-Cartridge Housing – Polypropylene |
| Material | Polypropylene |
| Micron / Rating | Set by cartridge selection |
| Max. Operating Pressure | 6 bar |
| Max. Operating Temperature | 50°C |
| Connections / Size | 3/4"–2" Threaded, 10"/20" cartridges |
| Key Applications | Chemical dosing systems; Laboratory and pilot plant filtration; Industrial water treatment; Electroplating and surface finishing; RO pre-filtration; Process water filtration; Pharmaceutical and laboratory utilities; Food and beverage process water |
| Material | 304SS, 316SS, 316L SS |
|---|---|
| Inlet/Outlet | Clamp, NPT, BSP, DIN |
| Cartridge Length | 10", 20" 30" |
| Bottom Closure Type | V-Clamp |
| Max. Pressure | 100psi (7bar) |
| Inlet/Outlet | 3/4", 1" |
|---|---|
| Cartridge Length | 5", 10", 20" 30" |
| Max. Pressure | 150psi (10bar) |
| Filter Media | Polypropylene, Bleached Cotton, Glass Fiber |
|---|---|
| Filtration Efficiency | ≥90% Nominal Efficiency |
| Outer Diameter | 63 mm (2.5") |
| Lengths Available | 10", 20", 30", 40" |
| End Cap Configuration | DOE, SOE (222/226 with Flat or Fin) |
| Gasket/O-Ring | EPDM, Buna-N, Silicone, Viton |
| Recommended Change-Out Diff. Pressure | 1.5–2.5 bar (21–36 psi) |
| Max. Differential Pressure | 3.4 bar (50 psi) @ 25°C |
| Chemical Compatibility | Excellent with Acids, Alkalis, and Solvents |
| Material | Carbon steel with inner Epoxy Resin Coated,Stainless steel 304, 316L, Duplex SS2205 |
|---|---|
| Inlet/Outlet | ANSI Flange |
| Closure | Swing Bolts and Nut |
| Finishing | Sandblast, Mirror Polished |
| Sealing | Silicone/Viton O-Ring |
| Pressure | 150psi onwards. |
| Mesh Size | Up to 400mesh |
| Brand | KETCO |
|---|---|
| Model Code | UP-UPE |
| Type | Ultra-High-Purity Sub-Micron Cartridge |
| Material | UPE Media, HDPE Core/Support/Cage |
| Micron / Rating | 50 nm – 1 micron |
| Max. Operating Pressure | 0.34 MPa @25°C forward / 0.24 MPa reverse |
| Max. Operating Temperature | 40°C |
| Connections / Size | 4", 10", 20" lengths |
| Key Applications | Ultrapure water systems; Wet process chemical filtration; Photoresist and developer filtration; Chemical mechanical planarization (CMP); DI water rinse |
Search
Archive
Recent Posts
Categories
- Filter Bags & Elements (4)
- Filter Cartridges & Elements (23)
- Filter Housings (12)
- Strainers (2)
Recent Comments